Wolf Legacy Induction Range Code 22: Pad error

What 22 means

On pre-2018 Wolf induction ranges such as the IR304TE/S/TH and IR365PE/S/PH, code 22 is a pad error. The range has found a problem with the touch pad, the keypad area that takes your taps. The display shows 22 and some or all keys may stop responding. It is separate from code 03, which points to liquid or cookware sitting on the glass.

Common causes of 22

Touch pad reading outside its normal range
Moisture or residue under or on the keypad area
Control board that cannot read the pad correctly after a power reset

✓ One safe check you can try

1. Turn all elements off and clear the glass of pans and cloths. 2. Dry the control area gently with a soft cloth. 3. Reset the range at the breaker: off for a minute, then on. 4. Try one key. If 22 shows again, leave the range off and call us.

! Why to stop there

Pad problems can look like a spill and still be a failed pad, so we test before replacing anything.
Repeated resets will not repair a damaged keypad and may hide a worsening condition.
You get a written price up front and a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

E05Wolf Induction Range Cooktop Code E05: LIN communication, no generator response 07ERR 07 on a Wolf Legacy Dual Fuel Range: Control Head Communication Lost E07Wolf Induction Range Cooktop Code E07: Primary control too hot 08Wolf Legacy Dual Fuel Range ERR 08 Code: EEPROM Checksum Wrong at Power-Up E09Wolf Induction Range Cooktop Code E09: Coil over temperature 09Wolf Legacy Dual Fuel Range Code ERR 09: Meat Probe Shorted E15Wolf Induction Range Cooktop Code E15: Generator voltage too low 0BWolf Legacy Dual Fuel Range ERR 0B Code: Calibration-Phase Converter Error

2222 questions

What is a pad error on a Wolf induction range?

Code 22 says the control cannot read the touch pad properly. The pad is the glass keypad where you select elements and settings. The range stops trusting its own keys until the reading clears.

Is 22 the same as 03?

No. Code 03 says a sensor is constantly pressed, often from liquid or a pan. Code 22 is a pad error reported by the control, so wiping the glass may not clear it.

Will a breaker reset fix 22?

Sometimes a short reset clears a one-time glitch. If 22 returns after the range is dry and cool, the pad or control needs inspection, and we quote the repair in writing first.