Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Wolf specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 322-7460 Schedule an Appointment
Error code · Range

Wolf Dual Fuel and Pro Induction Knob Code PROBE? / ? PROBE: Oven not sensing the probe

On Wolf dual fuel DFxx50 and Pro induction IRxx51 ranges, such as the DF30450/S/P and IR36551/S/P, PROBE? or ? PROBE on the oven knob means the oven is not sensing the meat probe. The guidance is…

Low risk · DIY check OK
Code
PROBE? / ? PROBE
Appliance
Range
Brand
Wolf
Warranty
30-day workmanship

What PROBE? / ? PROBE means

On Wolf dual fuel DFxx50 and Pro induction IRxx51 ranges, such as the DF30450/S/P and IR36551/S/P, PROBE? or ? PROBE on the oven knob means the oven is not sensing the meat probe. The guidance is to reinsert it and make sure it is the correct probe. Owners see the message when they start a probe cook, and the oven will not run in probe mode until the probe is recognized.

Common causes of PROBE? / ? PROBE

  • Probe not pushed fully into the oven jack
  • Wrong probe for the oven
  • Probe or jack that is dirty or worn
  • Probe that has failed
✓ One safe check you can try

1. Shut the oven off and allow it to cool down. 2. Push the probe plug firmly into the jack. 3. Check it is the probe made for your oven. 4. Wipe the plug and jack with a dry cloth. 5. Start again. If the message returns with a good probe, call us so we can check the jack.

! Why to stop there
  • Probes and jacks wear with heat and use
  • A wrong probe type will never be recognized
  • We test the jack so you do not buy another probe for nothing
  • Written price first, then a 30-day warranty on repair
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PROBE? / ? PROBEPROBE? / ? PROBE questions
Why does my oven not sense the probe?

Most often it is not pushed in all the way, or it is not the correct probe. Reseat it firmly and the oven usually recognizes it right away.

Can I cook without the probe?

Yes. Cook by time and temperature while you sort it out. The message only blocks probe mode. Use the oven by time and temperature, which is what most owners do while sorting out a probe.

Is it time for a new probe?

If it fails on a clean, fully seated connection, the probe may have failed. We test it and the jack, and give a written price before you buy anything.

Book a visit

Still unsure about PROBE? / ? PROBE?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call the desk ▤ Schedule an Appointment