Wolf Legacy Dual Fuel Range Code ERR 01: Door Lock Switches Not Sensed

What 01 means

On Wolf legacy dual fuel ranges such as the DF484CG and DF606CG, ERR 01 means the control drove the door lock motor but did not sense the lock or unlock switches within 60 seconds. The oven cannot confirm the door position, so you may see the code after a self-clean start, and the door may stay locked or the cycle may stop.

Common causes of 01

Door lock motor not completing its travel
Lock or unlock switch not being sensed
Wiring or connection to the lock assembly

✓ One safe check you can try

1. Turn the oven OFF at the knob and wait for it to cool. 2. Make sure the door is fully closed and nothing is wedged in it. 3. Turn the range breaker off for one minute, then on. 4. Try a short bake to see if the code returns. 5. If the code returns or the door stays locked, stop and call us.

! Why to stop there

Lock motor and switch checks need access behind the control that owners should not open.
A forced door can bend the latch and make the problem larger.
You see the price in writing before we begin, and the work carries a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

02Wolf Legacy Dual Fuel Range ERR 02 Over Temperature Code: 630 F Unlocked or 950 F Locked OCWolf Legacy Dual Fuel Range Code OC: oven knob lost contact 03ERR 03 on a Wolf Legacy Dual Fuel Range: Open Circuit on the RTD Oven Sensor OEWolf Legacy Dual Fuel Range Code OE: power relay shorted 04Wolf Legacy Dual Fuel Range ERR 04 Code: Shorted RTD Sensor Circuit CFH light slow blinkWolf DSI Gas Burner Code CFH Light Slow Blink: Ignition lockout 07ERR 07 on a Wolf Legacy Dual Fuel Range: Control Head Communication Lost E05Wolf Induction Range Cooktop Code E05: LIN communication, no generator response

0101 questions

Why does ERR 01 appear during self-clean?

Self-clean needs the door locked, so the control tests the lock first. If it does not see the lock switches confirm within 60 seconds, it stops and shows ERR 01.

My door will not open, what now?

Let the oven cool completely and reset the breaker once. Do not pry the door. If it stays locked, call us so we can release it without damage.

Is it safe to cook while ERR 01 shows?

We suggest not. The control cannot confirm the door state, so behavior may be unreliable. Call us and we will check the lock system and quote a price before starting.