Wolf Legacy Induction Code E2: Coil temperature too high

What E2 means

On Wolf legacy induction ranges built before 2018, such as the IR304TE/S/TH and IR365TE/S/TH, code E2 means the temperature at an induction coil has climbed higher than the control allows. The cooktop cuts power to protect itself, so the affected zone stops heating and the display shows E2 until things cool down. If the code returns on a cold cooktop, the coil or its sensing needs a technician.

Common causes of E2

Pan left empty or boiled dry on the zone so the coil overheated
Poor airflow around the cooktop or a blocked cooling path
Coil temperature sensing that reads too high
Induction generator or coil that is running hotter than it should

✓ One safe check you can try

1. Turn all zones off and let the cooktop cool for at least 30 minutes. 2. Check that the pan is flat, centered, and has food or liquid in it. 3. Wipe away spills and make sure nothing blocks the vents near the cooktop. 4. Restore power at the breaker once, then try a low setting. If E2 returns right away, stop using that zone and call us.

! Why to stop there

A hot coil can mean a failing generator that keeps overheating
Repeated overheating shortens the life of the cooktop electronics
We measure the zone under load, not just guess from the code
Our written price comes before any work, with a 30-day workmanship warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

0022Wolf Dual Fuel DFxx50 Code 0022: Left oven bake element drive shorted 20Wolf Legacy Induction Range Code 20: Input Voltage Over 300 Volts 0121Wolf Dual Fuel DFxx50 Code 0121: Right convection drive shorted in the right oven E01Wolf IR30450 and IR36550 Induction Range Code E01: Left Key Error 0122Wolf Dual Fuel DFxx50 Code 0122: Right convection drive shorted in the left oven ErrWolf Legacy Dual Fuel Range Code Err: How the Error Display Works 0221Wolf Dual Fuel DFxx50 Code 0221: Bake element DLB relay shorted, right or single oven Ignition LockoutWolf Gas Burner Code Ignition Lockout: Slow-Blinking Call-for-Heat Light

E2E2 questions

Can an empty pan trigger E2 on my Wolf induction range?

Yes. An empty or dry pan lets heat build quickly at the coil, and the cooktop shuts the zone down to protect itself. Let it cool, add food or liquid, and try again on a lower setting.

E2 appeared on a cool cooktop. What now?

That points away from cookware and toward the coil temperature sensing or the power electronics. Try one breaker reset after the cooktop has rested, and if E2 comes back, book a visit so we can test the zone.

Is it safe to keep cooking on the other zones?

Usually the other zones still work, but we suggest leaving the affected one off. An overheating coil can get worse, and using it repeatedly adds stress to parts that may still be good.