Wolf Legacy E Series Code Error 07 x 10: First door lock board output shorted

What Error 07 x 10 means

Error 07 x 10 on Wolf Legacy E Series wall ovens, such as the SO30PE/S/PH, reports DLB1 Shorted. The control sees the first DLB output as shorted. You see the code, and the oven may refuse to run a cycle because it cannot confirm that circuit is working normally. The x in the code stands for the cavity digit, so check which oven it names.

Common causes of Error 07 x 10

DLB1 output or load shorted
Wire in the DLB1 circuit damaged
Control output failing

✓ One safe check you can try

1. Switch the oven off and keep the door closed while it cools. 2. Make sure the door is closed all the way and that nothing sits in the latch area. 3. Leave the breaker off for one minute and then power the oven back up. 4. Try a short bake. If Error 07 x 10 appears again, stop using the oven and call us.

! Why to stop there

A short is an electrical problem condition that is unsafe for owners to trace.
The same code can come from the load, the wiring, or the control output.
We test, then quote in writing before any part is ordered.
If our work does not hold within 30 days, we come back.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 1831Wolf M Series Code 1831: Upper door lock relay open 3311Wolf M Series Code 3311: Upper thermal cutoff open 1A31Wolf M Series Code 1A31: Upper left convection fan triac open

Error 07 x 10Error 07 x 10 questions

Which codes belong with DLB1?

DLB1 has its own shorted code here, Error 07 x 10. DLB2 uses Error 07 x 11 and the auxiliary DLB uses Error 07 x 12, so the number tells us which circuit to test.

Does a closed door matter?

It is worth checking once, because a door that is not fully closed can upset door-related circuits. If the code returns with a closed door, the cause is electrical.

Can I use the other oven cavity?

On a double oven the other cavity may still work, but the control is reporting a short, so we recommend a visit before regular use.