Wolf Legacy E Series Code Error 11 x 0: Overtemp error with the door unlocked

What Error 11 x 0 means

Error 11 x 0 on Wolf Legacy E Series wall ovens such as the SO30PE/S/PH and SO30TE/S/TH is an overtemp error with the door unlocked. The control saw an oven temperature above its limit while the door was not locked, so it stopped heating. The display shows the code, and the cavity may stay hot for a while. Treat the cavity as hot until it has fully cooled.

Common causes of Error 11 x 0

The cavity temperature going above its limit
A sensor or control reading that overtemperature incorrectly
A door lock that is not engaging when the oven is hot

✓ One safe check you can try

1. Turn the oven off and do not open the door while it is hot. 2. Keep children and pets away from the oven. 3. Wait until the cavity has fully cooled. 4. Switch the breaker off for one minute, then on. 5. If Error 11 x 0 returns, do not use the oven and call us.

! Why to stop there

Overtemperature is a safety limit, and the cause must be found before the oven is used again.
A door that is unlocked while hot raises the risk of burns.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 2A30Wolf M Series Code 2A30: Microprocessor communication failure 1231Wolf M Series Code 1231: Upper bake element DLB open 2C20Wolf M Series Code 2C20: Relay board network failure

Error 11 x 0Error 11 x 0 questions

What does Error 11 x 0 mean?

The oven went over its temperature limit while the door was unlocked. The control shut heating down to protect itself and you. Heating stays off until the oven has cooled and the cause is checked.

Is it safe to open the door?

Wait until the cavity has cooled fully. An overtemperature oven can stay very hot, so please do not open the door early or let anyone lean in. The latch and door area stay hot even after the display goes dark, so patience is the safe choice.

Can I keep using the oven if the code clears?

We would not. An overtemperature event means something let the heat go past its limit. Book a visit and we will give a written price before work.