Wolf Induction Range IRxx50 Code A0C8: UIM off key not connected

What A0C8 means

On Wolf IRxx50 and Pro IRxx51 induction ranges, such as the IR30450/S/T and IR36551/S/P, code A0C8 means the user interface module reports that the Off key is not connected. Running a self-clean cycle can cause it. The display shows A0C8, and the Off key may not respond, so you might not be able to stop a function from the control panel.

Common causes of A0C8

Off key connection in the user interface module that is not detected
Self-clean heat that disturbed the keypad connection
User interface module that needs replacing

✓ One safe check you can try

1. Wait until the oven is completely cool after any self-clean cycle. 2. Cut power at the breaker for about a minute, then switch it back on. 3. Press the Off key and watch for a response. 4. If A0C8 returns, call us. Do not pry at the panel.

! Why to stop there

If the Off key does not respond, shutting down at the breaker is the only way to stop the oven, so we treat it carefully.
We confirm the module is the cause before replacing it.
Our price is written before work, and repairs have a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

0222Wolf Dual Fuel DFxx50 Code 0222: Bake element DLB relay shorted, left oven LOWER RELAYWolf Legacy Dual Fuel Range Message LOWER RELAY: Shift Register Feedback Failure OPPWolf Legacy Dual Fuel Range Code OPP: Other Oven Locked for Self-Clean PFWolf Legacy Dual Fuel Range Code PF: Power Failure or Too Hot for Mode 01Wolf Legacy Dual Fuel Range Code ERR 01: Door Lock Switches Not Sensed O9Wolf Legacy Dual Fuel Range Code O9: meat probe shorted 02Wolf Legacy Dual Fuel Range ERR 02 Over Temperature Code: 630 F Unlocked or 950 F Locked OCWolf Legacy Dual Fuel Range Code OC: oven knob lost contact

A0C8A0C8 questions

What does A0C8 mean?

The user interface reports that the Off key is not connected. It often follows a self-clean cycle. You may not be able to turn things off from the panel.

Did self-clean cause it?

It can. Running self-clean is a known trigger for this message. Let the range cool completely, then reset it. If it returns, the module needs a look.

What if Off does not work?

Use the breaker to remove power, and do not cook until it is fixed. Call us for a diagnosis and a written price. Every visit starts with a diagnosis, so nothing is replaced without your approval.