Wolf Legacy Dual Fuel Code PROBE SHORTED: Temperature probe failure

What PROBE SHORTED means

On legacy Wolf dual fuel ranges with text error messages, such as the DF series, PROBE SHORTED means the meat temperature probe has failed with a short, and the official fix is to replace the probe. The oven cannot read it, so probe-based cooking is unavailable. Owners see PROBE SHORTED when the probe is plugged in, and normal baking usually still works. The rest of the oven is not affected.

Common causes of PROBE SHORTED

Probe that has an internal short
Probe cord damaged by heat, bending, or crushing

✓ One safe check you can try

1. Turn the oven off and let it cool. 2. Unplug the probe and look at the cord for cracks, kinks, or burn marks. 3. Wipe the probe and its jack with a dry cloth. 4. Try the oven without the probe. If PROBE SHORTED shows with no probe plugged in, call us so we can check the jack.

! Why to stop there

Most often the probe itself is the part to replace
A message with no probe in place points elsewhere
We check the jack so a new probe is not wasted
Written price first, then 30 days of workmanship warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

02Wolf Legacy Dual Fuel Range ERR 02 Over Temperature Code: 630 F Unlocked or 950 F Locked OCWolf Legacy Dual Fuel Range Code OC: oven knob lost contact 03ERR 03 on a Wolf Legacy Dual Fuel Range: Open Circuit on the RTD Oven Sensor OEWolf Legacy Dual Fuel Range Code OE: power relay shorted CFH light slow blinkWolf DSI Gas Burner Code CFH Light Slow Blink: Ignition lockout 04Wolf Legacy Dual Fuel Range ERR 04 Code: Shorted RTD Sensor Circuit E05Wolf Induction Range Cooktop Code E05: LIN communication, no generator response 07ERR 07 on a Wolf Legacy Dual Fuel Range: Control Head Communication Lost

PROBE SHORTEDPROBE SHORTED questions

Can I keep baking if PROBE SHORTED is on?

Usually yes. The message is about the probe, not the oven elements. Remove the probe and cook by time and temperature until it is replaced.

Why do probes fail?

Heat, bending, and crushing in the oven door are the usual causes. A damaged cord can short, and the oven then reports PROBE SHORTED. Replace it with the correct one.

Does the new probe fix it every time?

In most cases. If the message appears with the probe unplugged, the jack or wiring may be at issue, and we check that before you buy another probe.