Wolf Steam Oven Code Demo-Modus: Demonstration mode is on

What Demo-Modus means

On Wolf convection steam ovens such as the CSO24TE/S/TH and CSO30TM/S/TH with the legacy knob control, Demo-Modus means demonstration mode is on. The oven shows its controls and display but does not heat or steam as normal. Owners see Demo-Modus and may think the oven is dead, when really it is in a showroom setting that needs to be turned off. Turning it off restores normal cooking.

Common causes of Demo-Modus

Demonstration mode switched on in the settings
Mode left on after delivery or installation
Settings changed by accidental key presses

✓ One safe check you can try

1. Turn the oven off. 2. Wait a minute, then switch the range's breaker off for two minutes and back on. 3. Check whether the display returns to normal. 4. If Demo-Modus stays, call us and we will switch it off properly. Please do not try random key combinations.

! Why to stop there

Demo mode may be set by accident and is easy to switch off
If it will not turn off, the settings memory may be at issue
We check the control before anything is replaced
Written price first and 30 days of warranty on our repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Steam Oven codes

E26Wolf 24-inch E Series Code E26: Break or loose contact in climate sensor, or blocked duct E87Wolf Convection Steam Oven Code E87: Exhaust slide valve stuck F6Wolf Convection Steam Oven Code F6: Processor and Main Relay Error E51 F0Wolf Convection Steam Oven Code F0: Core temperature probe sensor problem F15Wolf CSO Steam Oven Code F15: niche running too hot F1Wolf Convection Steam Oven Code F1: Food probe error F17Wolf CSO Steam Oven Code F17: climate sensor overtemperature F10Wolf Convection Steam Oven Code F10: Control moisture or water tank valve

Demo-ModusDemo-Modus questions

Why does the oven not heat in Demo-Modus?

Demo mode lets the oven display its functions for showrooms without heating. Nothing is broken. It needs to be turned off so cooking works again. We switch it off in minutes.

How did it turn on?

Usually by an accidental key sequence or because it was left on from display or installation. We can switch it off during a visit. It is a quick job.

Can I fix it myself?

A breaker reset can help in some cases. If it does not, turning off demo mode takes the right sequence on your control, which we can do quickly.