Wolf Legacy E Series Code Error 08 0 1: Keypad communication error seen by the UIM

What Error 08 0 1 means

On Wolf Legacy E Series wall ovens such as the SO30TE/S/TH and DO30PE/S/PH, Error 08 0 1 means the UIM detected a keypad communication error. The UIM is the user interface module behind the display. In plain words, the touch keys and the control stopped talking correctly. The display shows the code, and the keys may not respond or the oven may stop a cycle.

Common causes of Error 08 0 1

Communication between the keypad and the UIM interrupted
A loose or damaged ribbon or connector between the two
The UIM or keypad no longer answering

✓ One safe check you can try

1. Turn the oven off and wait a few minutes. 2. Wipe the keypad dry and clean; moisture or grease can upset the keys. 3. Switch the breaker off for one minute, then on. 4. Press a few keys and see whether Error 08 0 1 returns. 5. If it does, call us and leave the panels closed.

! Why to stop there

Keypad errors can come from the keypad, the UIM or the link between them, and only testing shows which.
Replacing the wrong board costs you money and does not clear the code.
Our technicians explain the finding and write the price down before beginning.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 1A31Wolf M Series Code 1A31: Upper left convection fan triac open 3421Wolf M Series Code 3421: Upper door lock timeout 1B21Wolf M Series Code 1B21: Cooling fan triac shorted (1B21)

Error 08 0 1Error 08 0 1 questions

What does Error 08 0 1 mean?

The UIM, the user interface module, detected a communication error with the keypad. It is the control reporting that the keys are not talking to it properly.

How is 08 0 1 different from 08 0 2?

In Error 08 0 1 the UIM noticed the communication error. In 08 0 2 the keypad noticed it. Both point to the same link, but the side that reports it helps us narrow the search.

Is the oven dangerous with this code?

Not by itself, but you may lose control of the oven. We suggest not running it unattended until we check it. We give a written price first.