Wolf M Series Code 1321: Upper broil element relay open

What 1321 means

On Wolf M Series wall ovens, 1321 tells you the relay for the upper oven's broil element is read as open, so the broil element is not being powered. The lower oven's report is 1322. The display shows the code, and broiling from the upper oven will be weak or absent while baking may still work. Other modes may still run, which can hide the problem for a while.

Common causes of 1321

The upper broil element relay is open on the relay board
A burned or loose wire or connector at the broil element
The broil element has failed

✓ One safe check you can try

1. Cancel the cycle and let the oven cool. 2. Make sure the oven breaker is on and has not tripped. 3. Reset power at the breaker for a minute, then try a short bake. 4. If the code returns, stop using that mode and call us. Do not touch the wiring behind the oven.

! Why to stop there

Replacing the board when the element is the cause wastes money, so we test in order.
On this code the cause may also be a burned or loose wire or connector at the broil element, or the broil element has failed, so we rule each out before we quote.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 1B21Wolf M Series Code 1B21: Cooling fan triac shorted (1B21) 3521Wolf M Series Code 3521: Upper door open or unlocked in clean 1C21Wolf M Series Code 1C21: Both upper bake element DLbs open

13211321 questions

Bake works but broil does not. Could that be 1321?

Yes, that split is typical. Code 1321 is the upper broil element relay reading open, which only affects broiling. Please avoid broiling until we test the relay and element, and we give a written price first.

Is the oven safe to use with this relay code?

The code means a heating output is not powered, which is a safe failure. The oven will not overheat from it, but cooking in that mode will be poor. We suggest avoiding the mode until we test it.

What does the repair cost?

We give you the price in writing before any work starts, after testing both the relay and the element. If only one needs replacing, we say so. The repair carries a 30-day workmanship warranty.