Wolf Legacy E Series Code Error 07 x 1: Outer bake relay shorted

What Error 07 x 1 means

On Wolf Legacy E Series wall ovens like the DO30TE/S/TH, Error 07 x 1 means the outer bake relay is shorted. The control sees power on the outer bake circuit when the relay should be open, so the outer element may keep heating. The oven stops and the code stays on the display. On a double oven, the number in the x position tells you which cavity reported it.

Common causes of Error 07 x 1

Outer bake relay stuck closed
Relay output on the board damaged
Control not switching the relay off

✓ One safe check you can try

1. Turn the oven off and open the door a little to release heat. 2. Cut power at the breaker for about a minute before turning it back on. 3. Restore power with nothing set and feel whether the oven warms up. 4. Should the oven report Error 07 x 1 a second time, stop and call us.

! Why to stop there

An outer element that stays powered is a heat and safety concern, not a nuisance code.
Confirming a welded relay means testing the circuit while power is present.
Our price is given in writing before any repair.
We back the job with 30 days of workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 1831Wolf M Series Code 1831: Upper door lock relay open 3311Wolf M Series Code 3311: Upper thermal cutoff open 1A31Wolf M Series Code 1A31: Upper left convection fan triac open

Error 07 x 1Error 07 x 1 questions

Does this match Error 03 x 1?

No. Error 03 x 1 says the outer bake element draws no current. Error 07 x 1 says the relay feeding it is stuck on. They point to opposite problems.

What should I do if the oven keeps heating?

Turn the oven off, switch off its breaker, and call us. Do not try to open panels, and keep the door closed unless you are releasing heat.

Can the control be reset?

A reset may clear the display, but a relay that is truly shorted will report again. The relay board needs a technician to test it.