Wolf Legacy E Series Code Error 03 x 6: Left convection fan not detected

What Error 03 x 6 means

On Wolf Legacy E Series wall ovens like the SO30PE/S/PH, Error 03 x 6 means the left convection fan is not detected. The control expects the fan to run during convection cooking and sees no sign of it. Food may cook unevenly, and the display shows the code until the oven is checked. Remember that x is the cavity digit, not a letter you will see on screen.

Common causes of Error 03 x 6

Left convection fan motor not running
Fan wiring or plug connection loose
Fan drive output not switching on

✓ One safe check you can try

1. Turn the control to off, then wait about thirty minutes. 2. Check that no pan or foil is touching the back wall of the cavity. 3. Power-cycle the oven at the breaker, leaving it off for one minute. 4. Start convection and listen for the fan. If it is silent or the code returns, call us.

! Why to stop there

The fan sits behind the rear cover, close to the hot cavity and wiring.
A silent fan can come from the motor, its plug, or the drive output.
We confirm which before quoting, and the price is given in writing.
You also get a 30-day warranty on how the repair was done.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 1C21Wolf M Series Code 1C21: Both upper bake element DLbs open 3621Wolf M Series Code 3621: Upper door locked, not in clean 1D21Wolf M Series Code 1D21: Both upper broil element DLbs open

Error 03 x 6Error 03 x 6 questions

Is the left fan the only one with a code?

No. The right convection fan has its own message, Error 03 x 7. Seeing x 6 tells us the left side did not report in.

Can foil cause this?

Foil or a pan touching the back wall can block a fan or its guard. Clear the cavity and test once. If the code returns with an empty oven, the cause is elsewhere.

Will bake mode still work?

Normal bake usually works because it does not rely on the fan. We still suggest a visit soon, since the control may cancel convection cycles.