Wolf CE152TF Integrated Module Code E5 (CE152TF): module relay error

What E5 (CE152TF) means

On Wolf's 2015 integrated module series, which includes the CE152TF/S and CI152TF/S, E5 stands for a relay error. The module's control found that its internal relay is not switching as commanded. The display flashes E5, and the module may fail to warm up or fail to switch off cleanly. The other modules beside it have their own controls and are not involved.

Common causes of E5 (CE152TF)

Relay in the module control not switching correctly
Module control board needing replacement
Loose connection behind the control

✓ One safe check you can try

1. Turn the module off and let the surface cool. 2. If the element stays hot with controls off, switch off the breaker and call us. 3. Turn the wall circuit breaker off for one minute, then turn it on again. 4. If E5 returns, leave it off and schedule service. Do not pull it out of the counter.

! Why to stop there

Integrated modules are compact, and reaching the control means careful removal.
A relay that sticks can keep power flowing, so we treat it with caution.
Expect a written quote first.
Our visit includes a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E7Wolf Induction Cooktop Code E7: Keyboard Diode Configuration Error E8Wolf CT Induction Code E8: no communication with generator 1 E9Wolf CT Cooktop Code E9: Generator 2 Communication Error E11Wolf CT Induction Code E11: A/D failure puts the cooktop in lock mode E54Wolf CT Induction E54 Code: Thermistor Short, Not a Pan Problem E12Wolf CT Cooktop Code E12: Universal OFF Key Failure E55Wolf Induction Cooktop Code E55: shorted thermistor on the heat sink E13Wolf Induction Cooktop Code E13: OFF key error, dry the controls first

E5 (CE152TF)E5 (CE152TF) questions

Why does the label say CE152TF?

That is the module model the code was listed for. The CE152TF/S is an electric module, and the same code is shown on other integrated modules in that series.

Can I keep using the other modules in my cooktop?

Each module has its own control, so a neighboring module can often keep working, though we suggest leaving the affected one off until we inspect it.

Do you replace just the control?

When the control is the cause, we can replace just that part rather than the whole module, and we confirm which part before quoting it in writing.