Wolf Induction Cooktop Code E107: Unspecific control error

What E107 means

On Wolf CI induction cooktops with the touchscreen control, such as the CI30460C/B and CI36560C/B, E107 is listed as an unspecific error. That means the control found a problem it could not pin to one circuit, and it stopped normal operation. You will see E107 on the display, and burners may not heat until the control restarts or is serviced. The code gives no direct clue about the cause.

Common causes of E107

Momentary control or power glitch that the cooktop flagged
Communication or internal control problem not covered by a specific code
Power supply to the cooktop interrupted or unstable

✓ One safe check you can try

1. Turn all zones off and remove cookware. 2. Disconnect the cooktop at its breaker for a minute, then reconnect it. 3. Look at the display; if it returns to normal, try one zone for a few minutes. 4. If E107 shows again, leave the cooktop off and call us for a diagnosis.

! Why to stop there

An unspecific code means the display does not narrow things down, so a technician has to test further.
Control and power circuits sit beneath the glass near live voltage.
Our technician writes up the price before work, and the repair is covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E7Wolf Induction Cooktop Code E7: Keyboard Diode Configuration Error E8Wolf CT Induction Code E8: no communication with generator 1 E9Wolf CT Cooktop Code E9: Generator 2 Communication Error E1Wolf CT Induction Code E1: ambient temperature too high around the cooktop E50Wolf Induction Code E50: Open Heat Sink Thermistor on a Generator E10Wolf Induction Code E10: generator 3 not responding to the control E53Wolf CT Cooktop Code E53: generator heat sink thermistor shorted E11Wolf CT Induction Code E11: A/D failure puts the cooktop in lock mode

E107E107 questions

What does unspecific mean for E107?

It means the control recorded a problem without naming a part. We work through power, communication links, and the board in order instead of guessing at a single part.

Could a power surge cause E107?

A power disturbance can trigger it, so a breaker reset is a sensible first move. If the code stays or returns often, the cooktop needs a proper check.

Is it safe to keep using the cooktop?

If E107 clears and does not return, normal use is reasonable. If it keeps coming back, we recommend stopping and booking a visit. Most of this is settled on the first visit.