Wolf MDD Information Cue i: Press Settings for Tips and Weight Range

What i means

The lowercase i on a Wolf drop-down door microwave such as the MDD24TE/S/TH or MDD30PE/S/PH is an information cue, not an error. It means extra help is available: press Settings to view tips or the weight range for the selected mode. Owners see the i appear during a sensor or auto-cook choice and wonder if something is wrong. Nothing is.

Common causes of i

Information cue for the chosen cooking mode
Weight range or tip available through Settings

✓ One safe check you can try

1. Press Settings to read the tip or weight range. 2. Adjust the food amount if the range does not fit. 3. Start the cycle as usual. 4. If the i stays and the pads do not respond, reset at the breaker and call us if it persists.

! Why to stop there

The i is a convenience message and rarely needs service.
Only unresponsive pads would need a control check.
Our quote is in writing, and you decide before we start.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

Three wavy linesWolf MDD Three Wavy Lines: In-Use Symbol, Not an Error AH SensorWolf Microwave Drawer Code AH Sensor: stops after 16 seconds with ERROR DoorWolf Microwave Drawer Code Door: Drawer Will Not Open or Close Fire SenseWolf Convection Microwave Code Fire Sense: Fire Detected, Shutdown Monitor SwitchWolf Microwave Drawer Code Monitor Switch: Monitor Fuse Blown at Plug-In No-HeatWolf Drop-Down Door Microwave Code No-Heat: door not latching TCOWolf Microwave Code TCO: thermal cutout open, unit dead ERROR (after 16 s)Wolf Microwave Drawer ERROR After 16 Seconds: AH Sensor

ii questions

Does i mean an error?

No. It is an information cue. Press Settings and the display shows tips or the weight range for your selected cooking mode. We check i on your own unit first, so there are no surprises on the bill.

Why does it appear with some modes?

Sensor and auto modes rely on food weight, so the microwave offers a hint. It helps you choose a food amount the mode can handle.

What if Settings does nothing?

Try a breaker reset for a minute. If the pads still do not respond, call us. We check the control and quote in writing first.