Wolf M Series Code 1931: Open Triac on the Upper Right Convection Fan

What 1931 means

For Wolf M Series wall ovens such as the SO30TM and DO30PM and the newer SO3050 models, code 1931 says the triac for the upper right convection fan is open. The control cannot switch that fan on through its triac output. You will see 1931 and the fan stays still during convection cooking, so heat may spread unevenly in the upper oven.

Common causes of 1931

Open triac for the upper right convection fan
Connection between the board and the upper right convection fan output loose
Control board output stage failed

✓ One safe check you can try

1. Stop the cycle and let the oven rest until it is cool to the touch. 2. Turn the oven breaker off for one minute, then restore it. 3. Run a brief test cycle and watch the display for 1931. 4. If the same code shows up, do not keep trying; phone us for a visit.

! Why to stop there

Telling a bad output from a loose connector takes a meter and some experience.
Diagnosing before buying parts is the cheaper route in the end.
We quote in writing first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 1321Wolf M Series Code 1321: Upper broil element relay open 3031Wolf M Series Code 3031: Upper temperature probe shorted 1421Wolf M Series Code 1421: Upper left convection element relay open

19311931 questions

What does 1931 mean?

The triac for the upper right convection fan is open, so the control cannot switch that fan on in convection modes. A visit lets us confirm 1931 in person, which keeps the repair focused.

Can I still cook with 1931 showing?

Normal bake may work, but convection will not circulate air properly and results can be uneven. Avoid long cooking until it is checked. Knowing 1931 saves guessing at the start, before any part gets ordered.

Will the fan come back after a reset?

Only if the open reading was a one-time event. If the code returns, the output or its connection needs testing, and we quote in writing first.