Wolf Legacy Dual Fuel Code Stone / No Bake Stone: Bake stone element not sensed

What Stone / No Bake Stone means

On legacy Wolf dual fuel ranges with text error messages, such as the DF series, Stone or No Bake Stone means the oven does not recognize the bake stone element, or senses it when it is not plugged in. Owners see the message when they start a bake stone mode, and the mode will not run until the oven sees the element correctly.

Common causes of Stone / No Bake Stone

Bake stone element not plugged in fully
Bake stone connection that is dirty or worn
Oven sensing the element when it is absent

✓ One safe check you can try

1. Switch the oven off and wait for it to cool. 2. Remove the bake stone element and plug it in again firmly, or unplug it if you are not using it. 3. Wipe the plug area with a dry cloth. 4. Turn on the oven and try again. If the message stays with the stone removed, call us.

! Why to stop there

A message with the stone unplugged points to the oven side
Connector wear can cause intermittent sensing
We check the receptacle before suggesting parts
Written price first and a 30-day warranty on repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

02Wolf Legacy Dual Fuel Range ERR 02 Over Temperature Code: 630 F Unlocked or 950 F Locked OCWolf Legacy Dual Fuel Range Code OC: oven knob lost contact 03ERR 03 on a Wolf Legacy Dual Fuel Range: Open Circuit on the RTD Oven Sensor OEWolf Legacy Dual Fuel Range Code OE: power relay shorted CFH light slow blinkWolf DSI Gas Burner Code CFH Light Slow Blink: Ignition lockout 04Wolf Legacy Dual Fuel Range ERR 04 Code: Shorted RTD Sensor Circuit E05Wolf Induction Range Cooktop Code E05: LIN communication, no generator response 07ERR 07 on a Wolf Legacy Dual Fuel Range: Control Head Communication Lost

Stone / No Bake StoneStone / No Bake Stone questions

Do I need the bake stone for normal baking?

No. The message only matters when you want the bake stone mode. Remove it and use normal bake modes if you do not need it.

Why does the oven sense a stone I removed?

The connection may be reading a false signal because of wear or residue, or the oven side has a problem. We check the receptacle to see which.

Is the bake stone itself broken?

Often it is not. Reseating it fixes many cases. If the oven still does not recognize it after a firm connection, we test the element and the oven side.