Wolf L/E/M Series Code PROBE? / ? PROBE: Oven is not sensing the probe

What PROBE? / ? PROBE means

On Wolf L, E and M Series wall ovens and DF and IR ranges, such as the SO30TM/S/TH and DO30PM/S/PH, PROBE? or ? PROBE means the oven is not sensing the probe. Either it is not seated fully or the wrong probe is in use. The CSO and SO24 probe is black and is not interchangeable with the others. The display shows the message. It is usually an easy fix at the probe.

Common causes of PROBE? / ? PROBE

The probe not pushed fully into its socket
The wrong probe for this oven, such as the black CSO/SO24 probe
A damaged probe cable or a dirty plug

✓ One safe check you can try

1. Unplug the probe and let it cool. 2. Wipe the plug and socket dry and clean. 3. Push the probe in until it seats fully. 4. Check that it is the correct probe for your oven. 5. If the message stays, bake without the probe and call us.

! Why to stop there

The cause is often the probe itself, which we can test on the spot.
A probe that reads wrongly can overcook food, so it is worth getting right.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 2A30Wolf M Series Code 2A30: Microprocessor communication failure 1231Wolf M Series Code 1231: Upper bake element DLB open 2C20Wolf M Series Code 2C20: Relay board network failure

PROBE? / ? PROBEPROBE? / ? PROBE questions

Why does my Wolf oven say PROBE?

The oven is not sensing the probe. Check that it is seated fully and that it is the right one for your model. Check both before anything else.

Can I use any probe?

No. The black CSO and SO24 probe is not interchangeable with probes for other Wolf ovens. Using the wrong one can trigger this message. Match the probe to the oven first.

What if a correct probe still is not sensed?

The probe or its socket may be worn out. Book a visit and we will test both, and give a written price before any repair.