Wolf Cooktop Code E11: Breaker reset advice or boil dry during cooking

What E11 means

On Wolf CT electric cooktops such as the CT30E/S and CT36EU, E11 comes with advice to reset power at the breaker, and no specific meaning is stated for it. On Wolf integrated module cooktops from the 2015 series, such as the SM15TF/S steamer, E11 means the liquid boiled dry during cooking. The display shows E11, and the module or cooktop stops heating until the cause is dealt with.

Common causes of E11

Steamer or fryer module that ran out of liquid while cooking
Temporary control condition on a CT cooktop that a breaker reset can clear
Sensor on a module that detects the dry condition incorrectly

✓ One safe check you can try

1. Turn the cooktop off and let any steamer or fryer module cool. 2. On a module, refill with water or oil to the marked level before cooking again. 3. Pause the circuit at the breaker for a full minute and then re-energize it. 4. If E11 appears again, stop and call us.

! Why to stop there

On a module, a boil dry may be as simple as a refill, but a sensor that misreads liquid needs testing.
On a CT cooktop, a code that returns after a reset points to something inside that needs a technician.
Expect a written quote before work starts and 30 days of workmanship coverage once it is done.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E7Wolf Induction Cooktop Code E7: Keyboard Diode Configuration Error E8Wolf CT Induction Code E8: no communication with generator 1 E9Wolf CT Cooktop Code E9: Generator 2 Communication Error 39Wolf 2015-Series Cooktop Code 39 Flags a Controller Options Error E4Wolf CT Induction E4 Code: Heat Sink of Generator 3 Overheated 47Code 47 on Wolf CI, CE and Module Cooktops: LIN Communication Error E40Wolf Induction Cooktop Code E40: Generator Burner Sensor Shorted 888 / 88Wolf CT Electric Cooktop Code 888 / 88: Display Shows 888 or 88

E11E11 questions

What should I do first when E11 shows on a CT cooktop?

Reset power at the breaker for one minute and try again. That is the step given for the CT platform. If E11 returns, a technician needs to find the cause.

How do I stop a boil dry on a steamer module?

Keep the water at or above the marked level and do not run the module on a long cycle without checking it. E11 means the liquid boiled dry during cooking.

Can a boil dry damage the module?

Heat with no liquid can harm a heating module, which is why the control stops cooking. If E11 appears with plenty of liquid, we check the sensor.