Wolf Cooktop Code E17: Keep-Alive check, TC error, or all off LED mismatch

What E17 means

E17 has three Wolf meanings. On CT electric cooktops such as the CT30EU, it is a keep-alive FMEA failure, a safety self-check that did not pass. On CI induction cooktops with the touchscreen, such as the CI36560C/B, it is an unspecified TC error. On integrated module cooktops from the 2015 series, such as the FM15TF/S, the All Off LED is not lit during cooking or is lit while the cooktop is idle. The display shows E17.

Common causes of E17

Safety self-check on the control not passing on a CT electric cooktop
TC problem the control could not identify on a CI touchscreen cooktop
All Off indicator that does not match the real cooking state on a module cooktop

✓ One safe check you can try

1. Turn every element off and check whether the All Off light matches what the cooktop is doing. 2. Flip the cooktop breaker off, count to sixty, and flip it back on. 3. Let the cooktop restart and watch the display. 4. If E17 returns, stop using the cooktop and call us.

! Why to stop there

Self-check and indicator problems involve the control that decides whether elements may heat, so we are careful.
The parts are inside the cooktop near live power.
Our estimate is written down and approved by you first; the work is then warranted for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E7Wolf Induction Cooktop Code E7: Keyboard Diode Configuration Error E8Wolf CT Induction Code E8: no communication with generator 1 E9Wolf CT Cooktop Code E9: Generator 2 Communication Error E00Wolf CI Touchscreen and Integrated Module Cooktops Code E00: Overvoltage or No Error E5Wolf CT Induction Code E5: open ambient thermistor and lock mode E1Wolf CT Induction Code E1: ambient temperature too high around the cooktop E50Wolf Induction Code E50: Open Heat Sink Thermistor on a Generator E10Wolf Induction Code E10: generator 3 not responding to the control

E17E17 questions

What does the All Off LED do?

It lights when nothing is cooking. If it stays dark while elements run, or glows when they are off, the module cooktop reports E17. A quick call with the exact code shown helps us plan the visit.

Is a keep-alive check serious?

It is the control confirming its own safety functions are alive. If that check fails, the cooktop stops heating and needs technician testing. We handle the cleanup and leave the cooktop ready to use.

Can I trust the cooktop is really off?

If E17 appears and the cooktop is unclear, switch it off at the breaker until we check it. We treat unclear on or off states with caution.