Wolf Induction Cooktop Code E102: Over temperature shutdown

What E102 means

On Wolf CI induction cooktops with the touchscreen control, such as the CI30460T/S and CI36560T/S, E102 means over temperature: the control sensed more heat than it allows and stopped heating to protect the cooktop. You will see E102 on the display and the affected zones go cold. The code usually follows long high-power cooking, an empty or unsuitable pan, or poor airflow around the unit.

Common causes of E102

Pan left empty or overheated on a hot induction zone
Cooling airflow around the cooktop restricted
Temperature sensor or control reading heat that is not real

✓ One safe check you can try

1. Turn every zone off and remove the cookware. 2. Let the cooktop cool for at least 30 minutes. 3. Confirm the vent area is not blocked and nothing is stored hard against the cooktop. 4. Restart with a flat pan that fits the zone and some food or liquid in it. 5. If E102 returns on a cool cooktop, call us.

! Why to stop there

Heat protection codes mean the cooktop already stopped itself once; repeated testing keeps stressing it.
If E102 appears on a cooktop that is cool, the sensor or board needs to be checked with proper tools.
The price is agreed in writing ahead of the repair, which then has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E7Wolf Induction Cooktop Code E7: Keyboard Diode Configuration Error E8Wolf CT Induction Code E8: no communication with generator 1 E9Wolf CT Cooktop Code E9: Generator 2 Communication Error E3Wolf Induction Code E3: Generator 2 Heat Sink Overtemp E30Wolf CT Induction Code E30: burner ON LED failure, LED board E33Wolf CT Cooktop Code E33: LED Board Failure on a Burner 39Wolf 2015-Series Cooktop Code 39 Flags a Controller Options Error E4Wolf CT Induction E4 Code: Heat Sink of Generator 3 Overheated

E102E102 questions

Can a dry pan trigger E102?

Yes, an empty pan heats very quickly on induction, and that kind of heat can trip the over temperature protection. Cool the cooktop and try again with food or liquid in the pan.

How long should I wait before using it again?

Give the cooktop at least 30 minutes with all zones off. If E102 shows immediately on a cold cooktop, waiting longer will not help and a technician should look.

Is E102 covered by a simple reset?

A one-minute breaker reset is fine to try. If the code keeps returning, the heat is real or a sensor misreads, and either way we diagnose it before quoting.