Wolf Legacy E Series Code No Broil Element Detect: 03 x 2, broiler not sensed

What No Broil element detect means

This applies to Wolf Legacy E Series wall ovens from the SO30TE/PE generation, such as the DO30TE/S/TH. Code 03 x 2 means the oven did not detect the broil element. The control expected to sense that element's circuit and did not, so broiling may stop working and the message stays on the display until the problem is resolved. The check is made by the control each time the oven starts.

Common causes of No Broil element detect

Broil element open or disconnected
Wiring to the broil element
Relay or board output for the broil circuit

✓ One safe check you can try

1. Switch the oven off and let it cool fully. 2. Look at the broil element for visible breaks or blisters without touching it. 3. Try a short bake to see if other functions still run. 4. If 03 x 2 returns, stop broiling and schedule service.

! Why to stop there

A broil element draws high current, and connections at its ends are inside the cavity wall.
Telling an element from a wiring or board cause needs a meter reading.
A written price comes before work, and we back repairs for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 2420Wolf M Series Code 2420: Relay board RTD circuit 3C20Wolf M Series Code 3C20: High input voltage 2631Wolf M Series Code 2631: Relay board door switch circuit

No Broil element detectNo Broil element detect questions

What does 03 x 2 mean?

The oven did not detect the broil element in its circuit check. Most often the element itself or its connection is open, but wiring or the output stage can also be the cause.

Can I replace the element myself?

We advise against it. The connection involves high current and tight access, and a wrong replacement can create a new problem. We quote first and install the correct part.

Will baking still work?

Frequently, yes, since baking uses different elements. We still suggest limiting use until the broil circuit is checked, so the oven does not raise further codes.