Wolf Legacy E Series Code Error 07 x 2: Broil relay shorted

What Error 07 x 2 means

Error 07 x 2 on Wolf Legacy E Series wall ovens like the SO30TE/S/TH means Broil Relay Shorted. The control sees the broil circuit powered when it should be off, which can mean the broil element stays hot. The oven stops and the code stays on the display. The digit shown where the code has an x is the cavity number.

Common causes of Error 07 x 2

Broil relay stuck closed (shorted)
Relay board output damaged
Control not switching the relay off

✓ One safe check you can try

1. Turn the oven off and open the door slightly to release heat. 2. Flip the circuit breaker off, count to sixty, and switch it on. 3. Restore power with nothing set and check whether the oven warms. 4. If the oven throws Error 07 x 2 again, call us and keep it off.

! Why to stop there

A broil element that will not switch off is a real heat hazard.
The relay board must be tested while powered, which is not safe for owners.
The price is in writing before any repair.
Parts we install and the labor behind them carry a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 2A30Wolf M Series Code 2A30: Microprocessor communication failure 1231Wolf M Series Code 1231: Upper bake element DLB open 2C20Wolf M Series Code 2C20: Relay board network failure

Error 07 x 2Error 07 x 2 questions

How is this different from Error 07 x 15?

Error 07 x 15 is the broil relay open, meaning it will not close. Error 07 x 2 is the relay shorted, meaning it will not open. Opposite problems.

Can the oven turn itself on?

A stuck relay can leave the broil circuit powered. If you notice heat with nothing set, turn off the breaker and call us. It keeps surprises off the invoice.

Is it fixable?

Yes. A shorted relay is a repair, usually of the relay board. We confirm the cause, quote in writing, and then order parts. That is a normal part of our process.