Wolf Legacy E Series Code Error 07 x 11: Second DLB output shorted

What Error 07 x 11 means

On Wolf Legacy E Series wall ovens like the SO30TE/S/TH, Error 07 x 11 is DLB2 Shorted. The second DLB circuit reads as a short to the control, so it holds the code on the display and may stop the oven from starting a cycle until the circuit is checked. Your display replaces the x with the cavity number, which shows where to look.

Common causes of Error 07 x 11

DLB2 output or load shorted
Damaged wire in the DLB2 circuit
Control output failing

✓ One safe check you can try

1. Power the oven down and allow plenty of cooling time. 2. Check that the door closes fully. 3. Do a one-minute power reset at the breaker. 4. Start a short bake. If Error 07 x 11 returns, leave the oven off and call us.

! Why to stop there

Tracing a short in the DLB2 circuit involves live wiring behind panels.
We need to separate a bad load from a damaged wire or a control output.
We provide a written price before replacing anything.
Should the same problem return in 30 days from our work, we fix it.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 0121Wolf M Series Oven Code 0121: upper right convection relay shorted 1231Wolf M Series Code 1231: Upper bake element DLB open 2C20Wolf M Series Code 2C20: Relay board network failure 1321Wolf M Series Code 1321: Upper broil element relay open

Error 07 x 11Error 07 x 11 questions

How is DLB2 different from DLB1?

They are two separate circuits on the control. Error 07 x 10 is the first, Error 07 x 11 is the second, so a technician starts on the matching circuit.

Does a short mean something is burned?

Not always. A short can be a wire touching metal or a failed load. We measure the circuit before deciding what, if anything, needs replacing.

Is a reset worth trying?

Once, yes. A one-time glitch can clear. If the code comes back, the short is real and the oven should stay off until we have tested it.