Wolf Legacy E Series Code Error 07 x 24: DLB2 relay open

What Error 07 x 24 means

Error 07 x 24 on a Wolf Legacy E Series wall oven, for example the SO30PE/S/PH and DO30TE/S/TH, reports an open DLB2 relay. Here x stands for whichever oven cavity is involved. The control commanded that output and the circuit did not complete, so the part it drives may stay off. You will see the code on the display, sometimes along with a refusal to start the mode that needs this part.

Common causes of Error 07 x 24

The DLB2 relay circuit reading open on the control
Damaged insulation or a corroded plug in the door-lock circuit wiring
A control board output that is no longer closing when called on

✓ One safe check you can try

1. Press OFF, open nothing, and let the oven cool down fully. 2. Make sure the control panel is dry and the door is latched. 3. Flip the dedicated breaker off, wait a minute, then on. 4. Heat the oven briefly and check the display for Error 07 x 24. 5. Should the code reappear, stop cooking in this oven and phone us.

! Why to stop there

Guessing at a DLB2 relay problem risks replacing the control when a connector was the cause.
People often keep using the oven when Error 07 x 24 disappears briefly, and it tends to come back at a bad moment.
If a part is needed, the price goes on paper first and the fix is guaranteed for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

0121Wolf M Series Oven Code 0121: upper right convection relay shorted 0221Wolf M Series Code 0221: Upper Bake Element DLB Shorted 0321Wolf M Series Oven Code 0321: Broil Relay Shorted on the Upper Element 0421Wolf M Series Code 0421: upper left convection relay shorted 0630Wolf M Series Oven Code 0630: Auxiliary DLB Shorted 2130Wolf M Series Code 2130: Relay board voltage calibration failed 3B20Wolf M Series Code 3B20: Low input voltage 2420Wolf M Series Code 2420: Relay board RTD circuit

Error 07 x 24Error 07 x 24 questions

Can you explain Error 07 x 24 in plain language?

Sure. The oven checked its DLB2 relay and the reading was open. It is like a switch the control cannot account for. The x is the cavity, and everything else on the oven may keep working.

What if the oven still heats with Error 07 x 24?

Even if it heats, the control has flagged the DLB2 relay. Continuing may stress other parts. We recommend stopping and having us check the circuit so a small problem stays small.

Who should look at Error 07 x 24?

A technician who can read the oven's circuits safely. The DLB2 relay sits behind panels, and opening them is not a homeowner job. We are glad to help and will quote before we start.