Wolf Legacy Dual Fuel Range Code OC: oven knob lost contact

What OC means

On Wolf Legacy dual fuel ranges, ERR OC is an oven knob message. Communication was lost with the oven controller, and the check points to the metal contacts on the knob. The range cannot read the oven knob position reliably, so the oven may not start or may stop during a cycle. This is a range message and does not apply to wall ovens.

Common causes of OC

Knob metal contacts dirty or worn
Knob not seated properly on the shaft
Link to the oven controller interrupted

✓ One safe check you can try

1. Switch the oven off and let it cool. 2. Pull the oven knob straight off, wipe the metal contacts behind it with a dry cloth, and press it back until it seats. 3. Turn the knob through its range once. 4. If OC returns, stop using the oven and call us.

! Why to stop there

Contacts that look clean can still be worn.
If the controller link is the problem, a knob cleaning will not help.
We quote in writing first and cover repairs for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

0222Wolf Dual Fuel DFxx50 Code 0222: Bake element DLB relay shorted, left oven LOWER RELAYWolf Legacy Dual Fuel Range Message LOWER RELAY: Shift Register Feedback Failure OPPWolf Legacy Dual Fuel Range Code OPP: Other Oven Locked for Self-Clean PFWolf Legacy Dual Fuel Range Code PF: Power Failure or Too Hot for Mode 01Wolf Legacy Dual Fuel Range Code ERR 01: Door Lock Switches Not Sensed O9Wolf Legacy Dual Fuel Range Code O9: meat probe shorted 02Wolf Legacy Dual Fuel Range ERR 02 Over Temperature Code: 630 F Unlocked or 950 F Locked OEWolf Legacy Dual Fuel Range Code OE: power relay shorted

OCOC questions

What does ERR OC mean on a legacy dual fuel range?

It says communication with the oven controller was lost, and the knob's metal contacts should be checked. In practice the knob and the controller are not talking properly.

Can I clean the knob contacts myself?

Yes, with the oven off and cool. Pull the knob straight off, wipe the contacts dry and reseat it. Do not use liquid cleaners or tools, and stop if anything looks burned.

Does the cooktop still work?

Typically the burners work independently of the oven knob. If you smell gas at any time, leave the home and call the gas utility from outside.