Wolf Induction Range Cooktop Code E07: Primary control too hot

What E07 means

On Wolf IR30450 and IR36550 induction ranges from 2018 on, such as the IR30450/S/T and IR36550/S/P, code E07 on the cooktop means the TC temperature is too high. The primary control has become too hot, so the induction system reduces power or shuts down to protect itself. The display shows E07 and zones may stop heating until the control cools.

Common causes of E07

Poor airflow or heat built up around the cooktop
Cooling system that is not removing heat
Temperature sensing that reads high
Heavy, long cooking that overheated the control

✓ One safe check you can try

1. Turn all zones off and let the cooktop cool for 30 minutes. 2. Make sure vents are clear and the kitchen is ventilated. 3. Toggle the breaker off for a minute and back on. 4. If E07 returns on a cool range, call us.

! Why to stop there

Overtemperature repeats if the cause is not fixed.
A sensor that reads high needs a measured test.
Written quote first, with a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

E07E07 questions

What does E07 mean?

The primary control is too hot, based on the TC temperature reading. The cooktop reduces or stops heating until it cools. You see the written price first, so there is no surprise charge afterward.

Is it my cookware?

Cookware rarely causes it. Heavy use and poor airflow are more common. If E07 shows when everything is cool, a sensor or cooling concern is likely.

When should I call?

If E07 returns after a proper cool-down, stop and book a visit. We quote in writing before any work. We explain what we find in plain words, and the repair carries a 30-day workmanship warranty.