Wolf Dual Fuel Range DFxx50 Code 3031: Probe shorted

What 3031 means

On Wolf DFxx50 dual fuel ranges from 2020 on, such as the DF30450/S/P and DF36450G/S/P, code 3031 means PROBE SHORTED. The control sees a short in the circuit of the meat probe, so it cannot read a temperature from it. You will see 3031, and cooking with the probe is blocked. The oven itself usually still bakes normally when you do not use the probe.

Common causes of 3031

Meat probe with a damaged cable or tip
Probe plug or oven jack that is bent, wet, or dirty
Probe circuit wiring inside the oven that reads as shorted

✓ One safe check you can try

1. Remove the probe from the food and from the oven jack. 2. Let the probe and the jack cool, and dry them if wet. 3. Plug the probe in firmly, checking that the plug and cable look straight and undamaged. 4. Try again. If 3031 remains with the probe out, call us.

! Why to stop there

If the code stays with the probe unplugged, the issue is inside the oven, not the probe.
A bad jack should be tested with power off, which owners cannot safely do.
Written quote first, and a 30-day warranty on the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

0222Wolf Dual Fuel DFxx50 Code 0222: Bake element DLB relay shorted, left oven LOWER RELAYWolf Legacy Dual Fuel Range Message LOWER RELAY: Shift Register Feedback Failure OPPWolf Legacy Dual Fuel Range Code OPP: Other Oven Locked for Self-Clean PFWolf Legacy Dual Fuel Range Code PF: Power Failure or Too Hot for Mode 01Wolf Legacy Dual Fuel Range Code ERR 01: Door Lock Switches Not Sensed O9Wolf Legacy Dual Fuel Range Code O9: meat probe shorted 02Wolf Legacy Dual Fuel Range ERR 02 Over Temperature Code: 630 F Unlocked or 950 F Locked OCWolf Legacy Dual Fuel Range Code OC: oven knob lost contact

30313031 questions

What does PROBE SHORTED mean?

The control sees a short circuit where the meat probe connects. It cannot read the probe, so probe cooking is locked out until the circuit reads normally.

Can I bake without the probe?

Usually yes. Take the probe out and use time and temperature instead. If the code still shows without the probe, tell us and we will check the circuit.

Should I buy a new probe?

Try cleaning and reseating first, or test with a known-good probe if you have one. If the code stays, the oven side may be the cause, and we diagnose before quoting.