Wolf Legacy Dual Fuel Code OUT: Probe test reminder

What OUT means

On legacy Wolf dual fuel ranges with text error messages, such as the DF series, OUT is not a breakdown. It appears during diagnostic mode as a probe test reminder, telling the person running the test to insert the temperature probe. Owners rarely see it unless the range was put into a test routine, by accident or by a technician.

Common causes of OUT

Range placed in its diagnostic mode during a probe test
Temperature probe not inserted when the test asked for it

✓ One safe check you can try

1. Turn the oven off and wait a moment. 2. Switch the range off at the breaker for about two minutes and back on to leave diagnostic mode. 3. Check the oven returns to a normal clock display. 4. If OUT keeps appearing during normal use, call us. Keep the probe cord away from heating elements and hot surfaces.

! Why to stop there

It may point to a stuck diagnostic routine
A probe that is not seated can also be a clue
We confirm the range is back in normal mode
Written price before work and a 30-day warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

0221Wolf Dual Fuel DFxx50 Code 0221: Bake element DLB relay shorted, right or single oven Ignition LockoutWolf Gas Burner Code Ignition Lockout: Slow-Blinking Call-for-Heat Light 0222Wolf Dual Fuel DFxx50 Code 0222: Bake element DLB relay shorted, left oven LOWER RELAYWolf Legacy Dual Fuel Range Message LOWER RELAY: Shift Register Feedback Failure OPPWolf Legacy Dual Fuel Range Code OPP: Other Oven Locked for Self-Clean PFWolf Legacy Dual Fuel Range Code PF: Power Failure or Too Hot for Mode 01Wolf Legacy Dual Fuel Range Code ERR 01: Door Lock Switches Not Sensed O9Wolf Legacy Dual Fuel Range Code O9: meat probe shorted

OUTOUT questions

Is OUT a problem with my oven?

Usually not. It is a prompt that appears in diagnostic mode asking for the probe to be inserted. It does not mean the oven has failed.

How did my oven get into diagnostic mode?

Often by pressing a particular key combination by accident. A power reset leaves the mode in most cases. If it keeps returning, we check the keypad for a stuck key.

Do I need to insert the probe?

Only if you are in the test and want to finish it. For normal cooking, exit the mode with a power reset and use the probe the usual way.