Code E115 / F29 on a Wolf CSO convection steam oven (24-inch or 30-inch series) is reported for a door lock that has not been initialized. A steam oven locks its door during certain cycles, so…
Code E115 / F29 on a Wolf CSO convection steam oven (24-inch or 30-inch series) is reported for a door lock that has not been initialized. A steam oven locks its door during certain cycles, so if the lock cannot confirm its position, the oven will not run. The oven may refuse to start, the door may stay locked or unlocked, and the code stays on the display.
1. Use the power key to shut the oven off and give it time to cool down. 2. Open and close the door gently, checking that nothing is in the seal or latch area. 3. Do not force the door if it is locked. 4. Turn off the circuit breaker for one minute and switch it back on before trying again. 5. If the code persists, call us; do not pry at the hinge.
If the lock lost its position, it may stay in the locked state. A power reset sometimes releases it. If not, do not pull hard; call us and we will free it without damaging the hinge.
No. The oven will not run a cycle it cannot confirm as safe, and we would not bypass the lock. Steam and a door that is not secure can cause burns.
Where it appears, it sits next to the E-code for the same door lock condition. We treat the pair together and check the lock, hinge, and wiring in order.
A technician diagnoses it on site and gives you the price in writing before any work starts.