Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Wolf specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 322-7460 Schedule an Appointment
Model library · Wolf Rangetop

RT362F

Wolf RT362F French Top Repair

Most common issues on this model

  1. Burner will not ignite, or sparks on after the flame has caught
  2. Flame lifts away from the burner ports
  3. Knob rotates but the burner never receives gas
  4. Long wait before the French top reaches cooking heat
  5. Lingering gas odor near the rangetop, which we treat as an urgent safety matter

Most 36-inch rangetops like the RT362F sit in a kitchen island or along a back counter, with a hood overhead and a base cabinet below. This model was made 2002–2009, which tells us what wear to expect before we open the cooktop.

A separate control feeds the French top, which lets us rule out the open burners quickly when only that section is off. Flame quality drifts as ports clog, which shows up first as a yellow or lifting flame at low settings. A dedicated spark module and valve micro-switch serve every burner, which lets us isolate one burner without disturbing the rest.

Before anything else, we test the spark at each burner so we know whether the ignition side or the gas side needs the work. The work is quoted in writing before it starts, and we warrant our own labor for 30 days.

Key features

  • Gas rangetop, 36-inch wide, carrying two open burners alongside a French top
  • Every burner has a spark module of its own, plus an electrode and a valve micro-switch
  • Raised control panel that brings the knobs forward of the counter line
  • French top section runs on its own burner, with its own control
→Codes

Error codes this model can show

RT362FRT362F questions
Does the French top share a control with the rest of the RT362F?

No. It carries a control of its own, which is why it can stop heating while the open burners keep cooking. We check that control first, then the burner behind it, and explain what we find before the work.

How do you tell whether my RT362F needs cleaning or a new part?

We clean burner heads, caps and electrodes first and retest, since that solves many complaints. Only if the burner still misbehaves do we move to replacements, and we show you what we found.

How soon should I call about a burner that will not light on the RT362F?

Soon, but there is rarely an emergency if you smell no gas. Use another burner meanwhile, and call us to schedule an inspection. We give you the price in writing before the repair.

Book a visit

Book repair for your RT362F

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule an Appointment