Wolf Warming Drawer HOT Message: Temperature Above Setting

What HOT means

On Wolf WWD30 and WD30 warming drawers, HOT shows when the drawer temperature is more than 10F above the set point, and it flashes until the temperature falls back within 10F. It is mostly an informational notice, for example after lowering the setting. The owner sees HOT flashing while the drawer cools down on its own. Food inside keeps warming meanwhile.

Common causes of HOT

Setting lowered while the drawer was still hot
Drawer warmed by outside heat such as sun
Control not bringing the temperature down as expected

✓ One safe check you can try

1. Leave the drawer closed and let it cool. 2. Check the setting is what you want. 3. Keep the drawer out of direct sun and away from the oven's exhaust heat. 4. Wait until HOT stops flashing. 5. If it keeps flashing for hours, call us.

! Why to stop there

A long-lasting HOT may mean the drawer is not bringing heat down, which needs a check.
Overheated food can dry out or spoil.
We test the control and sensing, quote in writing first, and give a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Warming Drawer codes

FUSEWolf Warming Drawer FUSE Message: Beeping, Control Board Needed PFWolf Warming Drawer Code PF: Power Failure Notice 30Wolf Warming Drawer, Code 30: Thermistor Short 40Wolf WD30 Warming Drawer Code 40: Element Sensing Error During Preheat 50Wolf WWD30 Warming Drawer Code 50 (Door Switch): Closed During Operation 60Wolf WWD30 Warming Drawer Code 60: Stuck Relay and Overheating 70Wolf Warming Drawer Code 70 (Cable): Relay Link to Control Open Er3Wolf CW24 Cup Warming Drawer Code Er3: Temperature Sensor Open

HOTHOT questions

Is HOT a problem?

Usually not. It reports that the drawer is more than 10F above the set point and will stop on its own once it cools within 10F of your setting.

How long should HOT stay on?

It depends on how far the temperature is above the setting. A short wait is normal. If it flashes for hours with the drawer closed, call us.

Can sun cause it?

Outside heat can raise the drawer temperature. If HOT shows on sunny days only, shade the unit. If it appears all the time, we should check the controls and sensing.