Wolf Dual Fuel Range DFxx50 Code 4322: Left convection element not drawing power

What 4322 means

On Wolf DFxx50 dual fuel ranges from 2020 on, such as the DF30450/S/P and DF36450G/S/P, code 4322 is the companion of 4321, reporting a left convection element with no detectable load. The element circuit looks open, so the control cannot heat that side for convection. You will see 4322, and convection results may be uneven or the mode may stop.

Common causes of 4322

Left convection element open inside
Wiring to the element that has loosened or overheated
Control board output for that element that is not working

✓ One safe check you can try

1. Power the oven off and allow it to cool completely. 2. Reset the range at the breaker: off for one minute, then on. 3. Test with a standard bake setting, not convection. 4. If 4322 shows again, stop using convection and call us.

! Why to stop there

Without testing, a bad element and a bad relay look the same.
Wiring that has overheated needs inspection with the range de-energized.
Our written price comes before any work, and repairs are warranted for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

0021Wolf Dual Fuel DFxx50 Code 0021: Bake element drive shorted, right oven 0EERR 0E on a Wolf Legacy Dual Fuel Range: Power Relay Shorted Closed 0022Wolf Dual Fuel DFxx50 Code 0022: Left oven bake element drive shorted 20Wolf Legacy Induction Range Code 20: Input Voltage Over 300 Volts 0121Wolf Dual Fuel DFxx50 Code 0121: Right convection drive shorted in the right oven E01Wolf IR30450 and IR36550 Induction Range Code E01: Left Key Error 0122Wolf Dual Fuel DFxx50 Code 0122: Right convection drive shorted in the left oven ErrWolf Legacy Dual Fuel Range Code Err: How the Error Display Works

43224322 questions

What does 4322 mean?

It reports the left convection element with no detectable load. The element circuit looks open, and convection heat on that side may be reduced or missing.

Why do I see 4322 instead of 4321?

The range uses both for the same condition. We treat them as one problem and test the left element and its wiring. We note your model and the exact display, and the repair carries a 30-day workmanship warranty.

Is this urgent?

Not usually, but do not run convection until it is checked. Book a visit, and you will get a written price before we do anything.