Wolf Cooktop Code E07: Model value change, TC too hot, or power board thermistor open

What E07 means

E07 shows on three Wolf platforms. On CT electric cooktops such as the CT30EU, it indicates a model value change. On CI induction cooktops with the touchscreen, such as the CI30460C/B, it means the TC temperature is too high. On integrated module cooktops from the 2015 series, such as the CE152TF/S, it means the ambient thermistor on the power board is open. The display shows E07, and heating may be limited.

Common causes of E07

Model value in the control that changed on a CT electric cooktop
Excess temperature in the TC circuit on a CI touchscreen cooktop
Open ambient thermistor on the power board of a module cooktop

✓ One safe check you can try

1. Switch all elements off and let the cooktop cool for 30 minutes. 2. Make sure the vent area is clear and nothing hot sits beside the unit. 3. Turn off the circuit breaker feeding the cooktop, wait one minute, then switch it on. 4. If E07 stays, stop using the cooktop and call; the control or board cannot be opened safely by owners.

! Why to stop there

Heat, a setting, and a thermistor are three separate problems behind one code.
The power board and control sit under live power, so we do not ask owners to open the unit.
We put the cost on paper before starting and warrant our labor for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E7Wolf Induction Cooktop Code E7: Keyboard Diode Configuration Error E8Wolf CT Induction Code E8: no communication with generator 1 E9Wolf CT Cooktop Code E9: Generator 2 Communication Error E13Wolf Induction Cooktop Code E13: OFF key error, dry the controls first E6Wolf CT Cooktop Code E6: shorted ambient thermistor E19Wolf CT Induction Code E19: read line failure E2Wolf CT Cooktop Code E2: generator 1 heat sink above 194F E20Wolf CT Cooktop Code E20: Shorted Generator Burner Sensor

E07E07 questions

Is a model value change something I did?

No, owners cannot set it. It means the stored model setting in the control no longer matches, which needs a technician to correct. We test first, so you only pay for the part that failed.

Could cooking heavily cause the TC temperature code?

On the CI touchscreen cooktops, E07 means TC temperature is too high. Heavy use with poor airflow can contribute, so we check cooling and ventilation as well as the control.

Can the thermistor be replaced on its own?

On a module cooktop the thermistor is on the power board, so the repair may involve the board. We confirm the reading and quote it in writing before work.